yoouf.blogg.se - Wanscam ip camera tool

Example: If the router’s local IP address is 192.168.1.1 then the IP address range of the camera would be 192.168.1.x with x being between 2 – 254.

Verify that the Gateway and DNS server is the router’s local IP address and the camera’s IP address should have the first three numbers as the router’s IP address.

Input the appropriate configuration information into every box.Ĥ.

Uncheck the check box option “Obtain IP from DHCP from server.

Double click the error message Subnet doesn’t match and navigate to Network Configuration.

If the above steps do not resolve the error manually assign an IP address for the camera. Once completed the camera will obtain a new IP address from the router’s DHCP server automatically. Verify that the camera and computer are connected to the same router and the router’s DHCP server is enabled.Ģ. This can be caused by the computer and camera not being connected to the same router or the camera was configured with a different IP address on another router.ġ. This error is normally generated because the camera and computer do not have an IP address on the same network segment. Overview: Sometimes while using the Equipment Search Tool newly discovered Foscam cameras will generate an error message Subnet doesn’t match.